PriceList for Chain For Hoist - Hoist Chains – Dia 13mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong
PriceList for Chain For Hoist - Hoist Chains – Dia 13mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong Detail:
Category
Application
Lifting and lashing, loads lifting, loads binding, hoisting
Chain Parameter
Based on SCIC G80 & G100 lifting chain production technology, we well extend our product line to fine tolerance hoist chain Grade T (Types T, DAT & DT), for use in serial chain hoists manual and power driven.
Figure 1: hoist chain / links
Key
1 | Traverse centre line of the link | l | is the multiple pitch length |
p | is the pitch | dm | is the material diameter as measured |
ds | is the weld diameter | e | is the length dimensionally affected by welding |
w3 | is the internal width at the weld | w2 | is the external width over the weld |
Table 1: hoist chain / link dimensions (mm)
Nominal size dn |
Material diameter tolerance |
Pitch |
Width |
Gaugelengthof 11xpn |
Weld diameter ds max. |
|||
pn |
tolerance1) |
internal w3 min. |
external w2 max. |
l |
tolerance1) |
|||
4 |
±0.2 |
12 |
0.25 |
4.8 |
13.6 |
132 |
0.6 |
4.3 |
5 |
±0.2 |
15 |
0.3 |
6.0 |
17.0 |
165 |
0.8 |
5.4 |
6 |
±0.2 |
18 |
0.35 |
7.2 |
20.4 |
198 |
1.0 |
6.5 |
7 |
±0.3 |
21 |
0.4 |
8.4 |
23.8 |
231 |
1.1 |
7.6 |
8 |
±0.3 |
24 |
0.5 |
9.6 |
27.2 |
264 |
1.3 |
8.6 |
9 |
±0.4 |
27 |
0.5 |
10.8 |
30.6 |
297 |
1.4 |
9.7 |
10 |
±0.4 |
30 |
0.6 |
12.0 |
34.0 |
330 |
1.6 |
10.8 |
11 |
±0.4 |
33 |
0.6 |
13.2 |
37.4 |
363 |
1.7 |
11.9 |
12 |
±0.5 |
36 |
0.7 |
14.4 |
40.8 |
396 |
1.9 |
13.0 |
13 |
±0.5 |
39 |
0.8 |
15.6 |
44.2 |
429 |
2.1 |
14.0 |
14 |
±0.6 |
42 |
0.8 |
16.8 |
47.6 |
462 |
2.2 |
15.1 |
16 |
±0.6 |
48 |
0.9 |
19.2 |
54.4 |
528 |
2.5 |
17.3 |
18 |
±0.9 |
54 |
1.0 |
21.6 |
61.2 |
594 |
2.9 |
19.4 |
20 |
±1.0 |
60 |
1.2 |
24.0 |
68.0 |
660 |
3.2 |
21.6 |
22 |
±1.1 |
66 |
1.3 |
26.4 |
74.8 |
726 |
3.5 |
23.8 |
1)These tolerances are usually divided into +2/3 and –1/3 for both the individual link and the standard gauge length. |
Table 2: hoist chain working load limit (WLL)
Nominal size dn mm |
Chain type T t |
Chain type DAT t |
Chain type DT t |
4 5 6 |
0.5 0.8 1.1 |
0.4 0.63 0.9 |
0.25 0.4 0.56 |
7 8 9 |
1.5 2 2.5 |
1.2 1.6 2 |
0.75 1 1.25 |
10 11 12 |
3.2 3.8 4.5 |
2.5 3 3.6 |
1.6 1.9 2.2 |
13 14 16 |
5.3 6 8 |
4.2 5 6.3 |
2.6 3 4 |
18 20 22 |
10 12.5 15 |
8 10 12.5 |
5 6.3 7.5 |
mean stress N/mm2 |
200 |
160 |
100 |
Table 3: hoist chain manufacturing proof forces and breaking forces
Nominal size dn mm |
Manufacturing proof force (MPF) kN min. |
Breaking force (BF) kN min. |
4 |
12.6 |
20.1 |
5 |
19.6 |
31.4 |
6 |
28.3 |
45.2 |
7 |
38.5 |
61.6 |
8 |
50.3 |
80.4 |
9 |
63.6 |
102 |
10 |
78.5 |
126 |
11 |
95 |
152 |
12 |
113 |
181 |
13 |
133 |
212 |
14 |
154 |
246 |
16 |
201 |
322 |
18 |
254 |
407 |
20 |
314 |
503 |
22 |
380 |
608 |
Table 4: total ultimate elongation and surface hardness
|
hoist chain types |
||
T |
DAT |
DT |
|
Total ultimate elongation A %min |
10 |
10 |
5 |
Surface hardness min dn < 7 mm, HV 5 dn = 7 mm to 11 mm, HV 10 dn > 11 mm, HV 10 |
360 360 360 |
500 500 450 |
550 550 500 |
Site Inspection
Our Service
Product detail pictures:
Related Product Guide:
With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for PriceList for Chain For Hoist - Hoist Chains – Dia 13mm DIN EN 818-7 Grade T (Types T, DAT & DT) Chain – Chigong, The product will supply to all over the world, such as: Slovenia, Portugal, Gabon, We adopted technique and quality system management, based on "customer orientated, reputation first, mutual benefit, develop with joint efforts", welcome friends to communicate and cooperate from all over the world.
By Jean from Norway - 2018.02.21 12:14
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Chris from Ukraine - 2017.08.18 18:38