SCIC chains and fittings for lifting are manufactured according to the international ISO 3076-3056-4778-7593, to the European EN 818-1/2/4 and to the DIN 5587 DIN5688 standards. Chains and fittings are made of alloy steel of the highest quality exceeding the minimum characteristics prescribed by the standards. SCIC chains and fittings for lifting are characterized by the following features:
-lighter weight compared to common steel chains thanks to their mechanical characteristics allowing reduced diameters;
-excellent resistance to dynamic loads (high resilience and to stress and fatigue;
-longer durability thanks to the excellent wear resistance (average hardness:38 HRC);
-full loading capacity between -40′C and +200′C without working load limit reduction;
-absolute safety and total guarantee of quality thanks to the very rigorous controls applied to the work process and the products and thanks to the advanced technology.
There are many kinds of chain now. Many people think that there is nothing complicated about the chain. In fact, there are many things that people don’t know about the chain now. Just take the types of chain for example. Now there are many different types. According to the purpose, there are transmission chain, transmission chain and transmission chain.
Now the performance of the chain in the machinery is very good, but whether it can work for a long time is one of the signs to check whether a chain is excellent. Now if the chain is excellent enough, then after a long time of work, it must be able to maintain a relatively stable working state.
Chain in many times in a lot of machinery, in many buildings can have an excellent play, have a good performance, so for the chain, many people should know more about it in the future, to see what kind of development the chain can have in the future, the chain in today’s highly automated manufacturers or equipment, is a very necessary device.
The lubrication situation of chain production will be different due to the difference of the key points of chain utilization, and most of the chain drives are not suitable. Oil drop lubrication and oil bath lubrication are adopted, as well as oil spray lubrication and oil rope lubrication. Oil drop lubrication is usually used for fast and long-distance transportation chains, such as baking chains and textile chains
Post time: Mar-12-2021