Cheapest Factory Case Hardened Din 22252 Mining Chain - Mining Chains – 26*92mm DIN 22255 Flat Link Chain – Chigong

Short Description:

Product Detail

Product Tags

Feedback (2)

Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for Sling Rope, Mining Chain Flight Bars, Engine Lift Chain, We encourage you to make get hold of as we've been wanting for companions inside our venture. We are sure you'll uncover doing company with us not only fruitful but also profitable. We've been prepared to provide you with what you require.

Cheapest Factory Case Hardened Din 22252 Mining Chain - Mining Chains – 26*92mm DIN 22255 Flat Link Chain – Chigong Detail:

SCIC Mining Chain

Application

Armored Face Conveyors (AFC),Beam Stage Loaders (BSL),road header machines

Mining Chain - flat link chain

Flat type link chain was firstly introduced into mining industry by German chain making company back in 1985. The flat link chain consists of round links (DIN 22252) but every second link (the vertical link) is flat link which straight sides are of flattened finish per DIN 22255. Due to the less outer width of flat link (vertical) than round link (horizontal), the full flat link chain height is thus as lower as flat link size.

SCIC flat links are of forged making, and from the same material as round links.

Dimensionally, the flattened straight cross section area is larger than that of round link. When the full flat link chain goes through designed heat-treatment and final inspection & testing, the mechanical properties of flat links are well guaranteed per designated chain size & grade.

Chain Parameter

SCIC flat link chain is made according to China MT/T-929 standard and factory Technical Requirements, as well as to DIN 22255 or clients specs (which is to be specially agreed).

SCIC flat link chain is used for Armored Face Conveyors (AFC), Beam Stage Loaders (BSL), road header machines and other equipment that requires this type of chain.

Anti-corrosive coatings (e.g., hot dipped galvanization) result in decreased chain mechanical properties, therefore the application of any anti-corrosive coatings shall subject to order agreement between buyer and SCIC.

Figure 1: flat link chain

Table 1: flat link chain dimensions

chain size *d x t*	diameter d (mm)		width e (mm) (max.)	pitch t (mm)		round link width (mm)		flat link width (mm)		unit weight kg/m (~)
chain size *d x t*	nominal	tolerance	width e (mm) (max.)	nominal	tolerance	inner b1 (min.)	outer b2 (max.)	inner b3 (min.)	outer b4 (max.)	unit weight kg/m (~)
26 x 92	26	± 0.8	27	92	± 0.9	30	86	30	74	12.8
30 x 108	30	± 0.9	33	108	± 1.0	34	98	34	86	18.0
34 x 126	34	± 1.0	37	126	± 1.2	38	109	38	97	22.7
38 x 126	38	± 1.1	42	126	± 1.4	42	121	42	110	29.4
38 x 137	38	± 1.1	42	137	± 1.4	42	121	42	110	28.5
38 x 146	38	± 1.1	42	146	± 1.4	42	121	42	110	28.4
42 x 146	42	± 1.3	46	146	± 1.5	46	135	46	115	34.2
42 x 152	42	± 1.3	46	152	± 1.5	46	135	46	115	35.0
notes: Larger size chain available upon inquiry. Link size (d) to be measured at link straight opposite link weld. Link width to be measured off the link weld.

Table 2: flat link chain mechanical properties

chain size *d x t* (mm)	chain grade	test force (kN)	elongation under test force % (max.)	breaking force (kN)	elongation at fracture % (min.)	minimum deflection (mm)
26 x 92	S	540	1.4	670	11	26
26 x 92	SC	680	1.6	850	11	26
30 x 108	S	710	1.4	890	11	30
30 x 108	SC	900	1.6	1130	11	30
34 x 126	S	900	1.4	1140	11	34
34 x 126	SC	1160	1.6	1450	11	34
38 x 126 38 x 137 38 x 146	S	1130	1.4	1420	11	38
38 x 126 38 x 137 38 x 146	SC	1450	1.6	1810	11	38
42 x 146 42 x 152	S	1390	1.4	1740	11	42
42 x 146 42 x 152	SC	1770	1.6	2220	11	42
note: deflection not applicable to forged flat link

Site Inspection

scic round steel link chain

Our Service

scic round steel link chain

Product detail pictures:

Related Product Guide:

Using a total scientific good quality management process, superior high quality and excellent faith, we get great name and occupied this field for Cheapest Factory Case Hardened Din 22252 Mining Chain - Mining Chains – 26*92mm DIN 22255 Flat Link Chain – Chigong, The product will supply to all over the world, such as: Swedish, Myanmar, Uganda, To work with an excellent products manufacturer, our company is your best choice. Warmly welcome you and opening up the boundaries of communication. We are the ideal partner of your business development and look forward to your sincere cooperation.

Case Hardened Round Steel Link Chain For Mining